Bell’O AVSC-9870 TV Stand for up to 73-inch Displays – Espresso
- Beautiful Espresso Finished Stand with Complimentary Black Tempered Safety Glass Shelves.
- Perfect For Most Large Flat Panel , Plasma, or LCS Screen TV’s up to 65 inches, or DLP TV up to 73 inches.
- There is Plenty of Room for up to 6 More Audio Video Components and the Hanging Middle Shelf is Perfect for your Center Channel Speaker.
- The Open Architecture Design of this Model Provides You with Lots of Flow Through Ventilation.
- With Bell’Os CMS Cable Management System You’ll have a Clean Look on the Backside while Hiding all you Wires and Interconnect Cables
- Dimensions for the Hanging Middle Shelf are 40″ wide by 16.75″ deep and 7.5″ height with a Weight Capacity of 50 lbs.
Product Description
With Bell’Os attention to detail the AVSC-9870 is a Beautiful Stand with a Rich Espresso Wood Finish Accented with Black Tempered Safety Glass Shelving and a Hanging Center Shelf to Hold a Center Channel Speaker, Cable Box, or DVR Set-up. This stand will hold an additional 6 Audio Video Components, Gaming Systems etc. Additional Features include an open flow design so components have air flow around them, and the Bell’O CMS Cable Management System to keep Wires and Interconnect Cables tucked neatly away and out of sight. See bello.com and use the online feature “what fits my TV” to see what Models/Styles work best and will fit your TV or Future TV!… More >>
Bell’O AVSC-9870 TV Stand for up to 73-inch Displays – Espresso
It’s a nice looking TV stand and Bello was easy to work with on getting new parts…but. Plain and simple it’s just a bad design. The center glass shelf has aluminum disks that are glued to the top shelf. The black hanging tubes then thread into the disk. After careful assembly it was time to move the stand into position. Upon picking up the stand 3 of the 4 aluminum disks broke away from the top glass shelf. Obviously we were very frustrated that our brand new tv stand was broken and would now have to deal with the hassle of retuning or getting replacements parts. Obviously I think Bello must have this item fail frequently because there was no problem getting replacements shipped out. In my opinion this a bad design and would not suggest anyone buy this TV stand unless you like things that break.
I received this item in a timely matter, it is definately heavy duty, and I just love it!
I ordered this stand for our new 65″ TV. It was shipped promptly and is beautiful. A part was broken when we got it. I spoke with Dorothy with Bello and she was sooo nice. We got a new replacement part quickly and would recommend this product and this company to anyone.
I too have been looking for a TV stand for a 65″ Mitsubishi rear projection TV. Not only does this unit look as good as the on line photo, it is sharp looking once out of the box and assembled. I’d advise any who are concerned about one reviewer’s negative review regarding middle shelf to avoid over tightening screws that go into the silver disks in question, and to hand tighten only the rods that fit into them. This is a really nicely built unit.
The TV stand is awesome! I was blown away by the quality and the fact it was less expensive than the matched factory TV/DLP stands. I have a 65″ WD-65C9 Mitsubishi DLP tv on the stand and it looks great. The stand would accomodate a 73″ DLP without a problem. It was very easy to assemble, extremely attractive, and durable. Has a great wall in the back to hide the wires but has nice slots for wire management. The stand is very large and can easily fit a center speaker, DVD player, VCR, satellite/cable receiver, surround sound receiver/amp, a CD changer, and two other components and possibly a PS3 or Xbox 360.